The dehumidification effect of the ceiling dehumidifier deteriorates and should be inspected in many ways
Time:2021/10/13 11:42:37
Usually when we use the ceiling dehumidifier, we will find that the dehumidification effect is not very good. In addition to partly due to the quality of the ceiling dehumidifier itself, a large part of the reason is also due to the lack of routine maintenance. Therefore, when the dehumidification effect of the ceiling dehumidifier deteriorates, we should check it in many aspects. Next, let the editor of the ceiling dehumidifier explain it, hoping to be helpful to everyone.
1. Make sure there are no obstacles in front of the entrance of the ceiling dehumidifier.
2. Whether the humidity set by the humidity control switch is correct.
3. Make sure whether the heat exchanger of the ceiling dehumidifier is blocked, and whether the evaporator is dirty or corroded (especially under severe operating conditions, pay special attention).
4. Whether the air filter is clogged is very important. Once the gas enters, the dehumidification effect becomes very weak.
5. The room temperature increases or decreases. If the room temperature is low, the dehumidification effect will be affected, and there may even be no dehumidification in the room. If the room temperature is low, you can use a heater to heat it to improve the dehumidification effect of the ceiling dehumidifier.
6. Determine whether the air flow is set to "light breeze".
7. Make sure whether there is a source of moisture in the house.
8. The indoor space is too large and the ceiling dehumidifier capacity is too low, which will affect the dehumidification effect.
9. Whether the doors and windows of the room are closed, and whether there is an exhaust system.
10. Whether the ceiling dehumidifier leaks fluorine or lacks refrigerant.
The above ten points are all about the inspection work done after the dehumidification effect of the ceiling dehumidifier is reduced. Thank you for your understanding and support!