What aspects should the ceiling dehumidifier do to prevent rust
Time:2021/10/12 14:02:20
Nowadays, ceiling dehumidifiers are gradually being adopted by most families. When you use them in the southern day and the rainy season, you don't have to worry about various moisture-related issues. It is of great benefit to family health and family property, and the installation is also very convenient. So how to do the rust removal work of the ceiling dehumidifier? Next, let the editor of the ceiling dehumidifier explain it, I hope it can be helpful to everyone.
1. Surface cleaning: Choose a suitable cleaning method according to the nature of the rusty surface and the current situation. Commonly used are solvent cleaning, mechanical cleaning and chemical cleaning.
2. After the surface is dry and clean, it can be dried by filtered dry compressed air, tumble dried at 120～170℃, or wiped dry with clean gauze.
3. Soaking method: Wet some small objects with anti-corrosion grease, and apply a layer of anti-corrosion grease on the surface of the dryer through a tapered roller guide. The thickness of the oil film can be achieved by adjusting the temperature or viscosity of the anti-corrosion grease.
4. Brush cleaning: used for outdoor construction equipment or special-shaped products that are not suitable for dipping or spraying. When cleaning, not only should pay attention to avoid accumulation, but also prevent leakage.
5. Spraying method: Some large anti-corrosion objects cannot be immersed. Generally, in a clean air room, filtered compressed air with a pressure of about 0.7 MPa is used to spray the ceiling dehumidifier. The spray method is suitable for solvent-diluted anti-rust oil or film anti-rust oil, but ideal fire protection measures should be taken.
The above five points are all about the rust removal work that the ceiling dehumidifier should do, thank you for your understanding and support!