Where does the noise of the rotary dehumidifier come from
Time:2021/9/15 8:43:07
Rotary dehumidifier is a device that converts dehumidification energy into mechanical energy. Its structure is relatively simple, its performance is reliable, and its application range is wide. But no matter how good the equipment is, there is no guarantee that there will be no malfunctions or accidents during use. So where does the noise of the rotary dehumidifier come from? Next, let the editor of the rotary dehumidifier explain it, I hope it can be helpful to everyone.
1. The drive shaft of the rotary dehumidifier oil pump and the coupling of the engine are not concentric, and the coupling is loose. When they are different, problems arise. Friction usually occurs and can damage the machine.
2. Insufficient oil level in the dehumidification oil tank and excessively high oil suction position will expose the oil suction pipe problem to the oil level and generate noise, prompting the user to solve the problem when there is a problem.
3. There are no paper gaskets on both sides of the pump casing and pump cover of the rotary dehumidifier. Under this development situation, the pump body and the pump cover are not vertically sealed, and air will be sucked in during use and a lot of noise will be generated.
4. When the filter of the rotary dehumidifier is blocked by dirt, the oil cannot be filtered. In this case, the filter is not smooth and produces noise, so it is necessary to confirm that the filter is working properly.
5. The shaft oil seal frame of the runner dehumidifier is off, and the pump casing is not sealed. If the shelf falls, it will definitely affect the work. Sound is a normal phenomenon, just find the cause and solve it.
6. When the gear set is in place, the meshing accuracy is insufficient. In this case, it is easy to make noise.
7. The safety valve is unstable. For example, improper installation of the spool valve and the valve hole, the contact between the poppet valve and the valve seat due to dirt stuck, the blockage of the damper hole, the skewed or missing spring, etc., can also cause pressure fluctuations. And the noise in the rotating wheel dehumidifier.
8. Mechanical vibrations of the drum of the rotary dehumidifier, such as thin pipes, multiple bends, looseness, pipe swings, unbalanced rotating parts of the motor and the drying pump, installation misalignment, loose connections, etc. are more likely to occur, which will cause vibration and noise.
The above eight points are all about the reasons that make the rotary dehumidifier produce noise, thank you for your understanding and support!