Some problems that need to be paid attention to in the use of rotary dehumidifiers in warehouses
Time:2021/9/14 8:34:25
Many raw materials and products in the warehouse need to be kept dry, otherwise it will reduce the quality of the products and bring unnecessary economic losses to the enterprise. Therefore, the warehouse air humidity requirements are getting higher and higher. In traditional methods, ventilation and moisture absorption are used to control humidity, but these methods are not effective and require a certain amount of manpower and material resources. Nowadays, more and more companies install rotary dehumidifiers in their warehouses to prevent moisture in the warehouses. So what issues should be paid attention to when using a rotary dehumidifier in a warehouse? Next, let the editor of the rotary dehumidifier explain it, I hope it can be helpful to everyone.
1. set humidity correctly
When using a rotary dehumidifier, the moisture content of the rotary dehumidifier should be set according to the stored items. Different materials have different moisture content. Some materials will get wet when the air humidity is 80 o'clock, and some materials will get wet when the air humidity is 60 o'clock. Generally, the humidity is set at around 50 o'clock, but for some sensitive and delicate items, the humidity should be set lower.
2. Clean the rotary dehumidifier regularly. After a period of use, there will be a lot of dust on the filter, especially in some industrial warehouses that need to be cleaned regularly. Excessive dust will affect the air volume inside the machine and reduce the dehumidification efficiency of the rotary dehumidifier. As for the cleaning frequency of the filter, it is determined according to the dust situation in the warehouse. If there is little dust, it is enough to clean it once a month; if there is too much dust, it should be cleaned at least once a week.
3. regular inspection
No matter it is used for a period of time, the parts will wear out, especially the rotary dehumidifier. Long-term treatment of water vapor will accelerate the aging of circuits and control components. Regularly ask professionals to check the circuit in the dryer room, replace aging parts and fill up with refrigerant to ensure that the dryer is always in good working condition.
4. according to the industry configuration special rotary dehumidifier
If various corrosive materials are stored in the warehouse, the anti-corrosion rotary dehumidifier needs to be adjusted. In the warehouse storing inflammable and explosive materials, professional explosion-proof rotary dehumidifiers should be used instead of traditional rotary dehumidifiers.
The above four points are all about the four issues that need to be paid attention to when using a rotary dehumidifier in a warehouse. Thank you for your understanding and support!