What methods can be used to improve the maintenance of the rotary dehumidifier
Time:2021/12/24 11:14:23
Rotary dehumidifiers can quickly and effectively reduce air humidity, and effectively solve problems that cannot be solved by other freezing methods such as low humidity and low temperature. They are widely used in food processing, electronics, electrical appliances, chemical, national defense, printing and other industries. So how to improve the maintenance of the rotary dehumidifier? Next, let the editor of the rotary dehumidifier explain it, I hope it can be helpful to everyone.
1. The air inlet and outlet of the rotary dehumidifier must not be blocked by obstacles, and the air filter must be cleaned.
2. The rotary dehumidifier should be placed in the center of the room.
3. The condenser should be cleaned frequently and kept clean.
4. If the air humidity is below 30%, it will appear too dry and uncomfortable, so there is a reliable humidity controller to control it and keep it in the range of 50% to 60%. Close doors and windows as much as possible when in use to achieve the effect of indoor dehumidification. The body of the rotary dehumidifier must be level, and must not tilt or swing laterally to avoid malfunction or abnormal noise of the rotary dehumidifier.
5. When the ambient temperature is lower than 15°C, the water droplets attached to the surface of the evaporator will freeze, weakening the effect of the desiccant. If the ambient temperature exceeds 40°C, the pressure in the system will increase and the compressor will be overloaded. The protector must cut off the circuit, otherwise the compressor motor will be damaged. Therefore, the suitable temperature range of the dehumidifier is 15-40°C.
6. The water storage tank of the rotary dehumidifier is too full. In order to avoid the need to move the body of the rotary dehumidifier to fill it with water and soil contamination during operation, please unplug the power cord first, and then drain the water in the water storage bucket.
7. The rotary dehumidifier cleans the air filter regularly (about once every two weeks) to maintain the efficiency and durability of dehumidification and dust removal. Clean the air filter, rinse it with water below 40°C, and use detergent as much as possible. After washing off the dust, rinse it with water, dry it in a cool place, and put it back in the box. When cleaning the shell, wipe it gently with a damp cloth; avoid spraying clean water directly to avoid damage to the electrical insulation. There is an adhesive on the surface of the body, which can be washed with soap and water. Avoid splashing gasoline, thinner or aerosol pesticides to avoid peeling or discoloration of the paint. Do not use thin rods or iron wires to dig out the inside of the rotary dehumidifier to avoid malfunction or danger.
8. After the rotary dehumidifier is moved, try to stand it for four to six hours before using it. Since the compressor pipeline in the rotary dehumidifier contains cold coal, the cold coal should be returned to place within four to six hours after being moved.
9. Unplug the power cord during power outages, long-term use or travel to extend the service life of the rotary dehumidifier.
The above nine points are all about the maintenance work that should be done for the rotary dehumidifier. Thank you for your understanding and support!