Some links that should be paid attention to during the operation of the rotary dehumidifier
Time:2021/7/2 16:53:33
Rotary dehumidifiers are no longer unfamiliar in daily life. Usually in homes, hospitals, factories, etc. Because the rotary dehumidifier has strong dehumidification capacity and is effective, the rotary dehumidifier is gradually introduced to facilitate daily work. Like all traditional machines and equipment, the rotary dehumidifier needs special attention in daily use to ensure better performance. Operating status. Next, the editor of the rotary dehumidifier will explain some of the links that need to be paid attention to in the daily use of the rotary dehumidifier.
1. When installing the system, the regeneration exhaust pipe of the rotary dehumidifier must be insulated, the length of the pipe must not be too long, and the direction of the wind must have a slope greater than 1%.
2. In case of sudden power failure, the filter of the electric heating unit should be removed in time to prevent the regeneration filter of the rotary dehumidifier from catching fire.
3. In order to prevent moisture from escaping from the outlet of the rotary dehumidifier, the condensate outlet must be installed at the lowest point of the condensate, and the elbow of the water seal must be consistent with the pipe head.
4. The filter at the treatment tuyere and regeneration tuyere of the rotary dehumidifier should be cleaned 1-2 times a week, especially check for holes, and replace them if necessary.
5. When the rotary dehumidifier is running, make sure that the rotary motor or the regenerative fan is not overloaded, otherwise the equipment will stop.
6. If the rotary dehumidifier cannot be used for a long time, especially at low temperatures, drain the surface cooler, use compressed air equipment to pump out all the accumulated water if necessary, and ensure that the surface cooler does not freeze.